一、內滑動外固定
I. Internal sliding and external fixation
聚氨酯保溫鋼管受熱收縮時，一定會有所變化地運動，產生位移現象也是有可能的，而保溫構造層與外套管普通都是一種整體構造。外固定即工作鋼管和外維護管一定要一同固定才算好，在每一段管道和補償器的兩端，都要設兩個很大的鋼筋混凝土支墩，這樣保證管道的固定不便還是有點益處的。外固定由于需求設鋼筋混凝土支墩，所以施工占地大、投資多、工期有時分還長，所以還是之前留意一下比擬好。依據想用的外護管的不同，又可分為塑套鋼構造、玻璃鋼套鋼構造和鋼套鋼構造。經過理論證明，塑套鋼構造目前曾經不順應直埋蒸汽管道的開展趨向。
When polyurethane insulating steel pipe is heated and contracted, it will change its motion, and it is possible to produce displacement phenomenon. The insulating structure layer and outer casing are generally a kind of integral structure. External fixing means that the working steel pipe and the external maintenance pipe must be fixed together before they are considered good. Two large reinforced concrete piers should be installed at both ends of each section of the pipe and the compensator, so as to ensure the inconvenience of pipe fixing, it is still a little beneficial. Because of the need for reinforced concrete piers for external fixing, the construction area is large, the investment is large, and the construction period is sometimes longer, so it is better to pay attention to the comparison before. According to the difference of envelope, it can be divided into plastic envelope steel structure, FRP envelope steel structure and steel envelope steel structure. It has been proved theoretically that the plastic sleeve steel structure did not conform to the development trend of directly buried steam pipeline at present.
二、內滑動內固定
II. Internal sliding internal fixation
把工作鋼管經過一定的構造方式固定在外維護管上，充沛應用外維護管的強度和剛度，以及外維護管與土壤之間的摩擦力來進一步使內管固定好，不用鋼筋混凝土構造固定，可儉省鋼筋混凝土支墩的建造。只要以鋼管作為外維護管才可能采用內固定方式，固定端有隔熱設備，以減少熱橋效應，同時外維護管應有足夠的強度，以滿足管道程度推力的請求。對"鋼套鋼"保溫構造，采用內固定構造具有很大的優越性。依據外護管的不同，又可分為鋼套鋼構造和鋼套鋼復合構造。
Fixed the working steel pipe on the external maintenance pipe through a certain construction mode, fully utilized the strength and stiffness of the external maintenance pipe, and the friction between the external maintenance pipe and the soil to further fix the internal pipe, without the use of reinforced concrete structure, the construction of reinforced concrete piers can be saved. As long as the steel pipe is used as the external maintenance pipe, it is possible to adopt the internal fixation method. The fixed end has heat insulation equipment to reduce the thermal bridge effect. At the same time, the external maintenance pipe should have sufficient strength to meet the requirement of pipeline thrust. It has great advantages to adopt internal fixing structure for "steel sleeve steel" thermal insulation structure. According to the difference of outer guard pipe, it can be divided into steel jacket structure and steel jacket composite structure.
三、外滑動內固定的方式巧應用
3. Skillful application of external sliding internal fixation
把聚氨酯保溫管的保溫資料和工作鋼管經過一定工序使之分離，在后呢就會構成一個整體，保溫構造和工作鋼管在管道熱收縮時一定是一同運動的。外套管與保溫構造層之間有10~20mm的間隙，這樣的設計構造不只可以起到良好的保溫作用，關于排潮來說也是一種牢靠的通道。工作鋼管與外套管之距離一段間隔就用一組隔熱導向支架來停止支撐，這樣能夠減少管道位移時的摩擦力，使之在挪動的時分會愈加的煩瑣快速。
The insulation data of polyurethane insulating pipe and working steel pipe are separated by a certain process, and then they will form a whole. The insulation structure and working steel pipe must move together when the pipe shrinks. There is a gap of 10-20 mm between the outer casing and the thermal insulation structure layer. Such a design structure can not only play a good role in thermal insulation, but also be a reliable channel for tidal discharge. The distance between the working steel pipe and the outer sleeve is separated by a set of heat-insulating guide brackets to stop the support, which can reduce the friction force when the pipe displaces and make it more tedious and fast when it moves.
The above wonderful content is compiled and published by the black jacket straight-seam steel pipe. If you have more questions, please call or leave a message at http://www.qndr49.cn. We will answer your questions in time.
